80-200Khz 100KW Ultrahigh Frequency Induction Heating Machine
Main Characteristic:
1. It has such features as high frequency, fast heating speed, high efficiency and easy operation.
2. Infineon IGBT and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
3. 100% Duty cycle, continuous working is allowed at maximum power output.
4. Simple to install, Installation can be done by unprofessional person very easily;
5. Display of heating power, Power %, Current, Voltage, oscillating frequency.
6.Transformer Ratios can connect different Induction coils,Work different workpiece.
7.Large working application, annealing, quenching/Hardening, Hot Forging, Heating Treatment, Soldering/Welding/Brazing and melting.
Specfication:
| Type | UF-100KW |
| Work power | 380-480V *3Phase 50-60hz |
| Output power | 100KW |
| Input current | 150A |
| Fluctuating frequency | 80-200KHZ |
| The flow rate of cooling water | 0.1-0.3Mpa >10L/MIN |
| Water temperature protection point | 40℃ |
| Duty cycle | 100%(40degree room temperature) |
| Weight | 65KGS 50KGS |
| Size | 75×40×84 CM
65×34×50 CM |
Advantage:
1. CE certificated, more than 22 years experiences, high quality control and good performances.
2. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type
3. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine. Will not pollute electricity Net.
4. Digital type machine, frequency, power, current can shows in the touch screen, easy to control the machine and see the working efficiency.
5. Water Pressure and water Temperature Meter in the machine.
6. Adjustable Transformer, more options for you to connect different induction coils. Will be large using for different workpiece.
Application:
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear(orchard shear).
2. Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin,
chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Quench for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam,
chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non artificial reason, any quality problems such as design,
manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Product Tags:
|
|
80-200Khz 100KW Ultrahigh Frequency Induction Heater Induction Heat Treating Equipment Images
|
